How To Thread A Sewing Machine – Expert Tips As Simple As 1,2,3

Learning how to thread a sewing machine is one of the basic things to get used to as you learn to use the sewing machine. The art of threading a sewing machine can be clumsy and frustrating at the initial time.

This is particularly so for people who can’t boast of the best eyesight. Ironically people who use glasses are not spared the rigor of threading the needle of a sewing machine. With constant practice however you can know how to thread a sewing machine like an expert

Threading the sewing machine is not just about threading the needle but having the threads ready for stitching. To that extent therefore, it is a process that begins at the top of the sewing machine tension disc. This process of threading a sewing machine is complete only when the lower and upper threads have been released for stitching.

Until this process is completed the stitching process with your sewing machine cannot commence. It is therefore important to carefully study your sewing machine manual to have a clear understanding of the threading process.

This article is an attempt at breaking down the process of threading a sewing machine to further simplify and flatten your learning curve. We will also be considering threading the upper and lower thread in details and see how this process ends up in giving us a stitch.

Click here to check this out and buy on Amazon

How To Thread A Sewing Machine

Upper Threading Of A Sewing Machine

To commence the upper threading of your machine, the spool of the thread is placed on top of the spool pin which is set on the machine’s right side. When this is done, you then pull part of the thread away. This makes the spool stable and also makes the thread come from underneath the spool.  If you are using a machine with a diagram, it will help you check the location of the spool pin and the direction in which the thread goes.

Depending on the make of your machine, the spool may be the upright peg or the one in a horizontal position. Some sewing machines come with a plastic made disk meant to hold the spool in place. It also serves to stop the upper thread from flying off from the top of the machine as soon as you begin stitching.

The next step would be to cover the thread round its guide and then pull the thread’s end away from the thread spool that is placed on the machine. You then take the thread to the opposite side and all through the route of the thread guide as displayed on the machine’s diagram.

Once this is done, you make sure the thread that is round the guide as well as the one in front is brought to the side that is U shaped. This makes the thread to pass through easily. There is likely to be some manual that comes with the machine which shows how this is done.

The thread is then pulled down by following some directional arrows and guide on the sewing machine . You will need to coil the thread round the tension disc that is on the base and back ascending to the top through the next thread guide.  The next step is to pull the thread back up again into the second tier thread guide.

Once the thread’s journey through the second guide is done, a long, slim U shape is finally made with the thread. The tension disc of some machines may come with a little wire most likely attached for the purpose of ensuring the thread remains in place.

The thread that is close to the take- up lever will be wrapped on top and back to the needle with the steel piece take-up lever projecting from the next thread guide. You will find a hole on the steel piece where the thread will pass through.  Once this is done, a big, narrow S shape will be created by the thread.

The next stage is to get the needle threaded by pulling it from the machine to the needle’s small eye.  You will then need to pull some inches of the thread out to the opposite side of the needle. This thread is pulled through a gap at the steel presser foot under.  With this, you have done the upper threading of the sewing machine.  All you now need do is to get the lower threading done before the machine can be used.

Click here to check this out and buy on Amazon

Lower Threading Of A Sewing Machine

The first step in threading the lower part of your machine is to remove the cover of that compartment. The case of the bobbin is either beneath a little opening directly below the stitching location of your machine, or on the front side of the needle.

Open this chamber once you locate it and you will find the case of the bobbin placed inside it. It is in this bobbin case that you will insert the bobbin that has already been threaded before now.

The cover of the bobbin case area should be easy to uncover for machines that have their bobbin case in that location. There could be a variation of the exact location of the bobbin casement in some sewing machines. This is why the sewing machine manual should always be handy to give clear and proper guidance.

how to thread a sewing machine
Photo credit: commons.wikimedia.org

Before putting the bobbin in the bobbin case compartment, it is necessary to loosen a bit of the thread that’s been threaded on the bobbin. The thread you have released from the threaded bobbin is to facilitate your catching the lower thread as soon as you rotate the sewing machine’s hand wheel.

It is important to unwind just a reasonable quantity of the thread for this purpose. This is because unwinding too much thread will be a waste of the thread while doing too little may make it difficult for the thread to catch.

The bobbin that is now placed in the bobbin case compartment should be directly below the location of the needle. In doing this, it is important to confirm from the drawing on the machine’s bobbin compartment, the direction of the thread inside the bobbin. The bobbin which is now encased will be inserted into the bobbin compartment.

In placing the bobbin in its compartment, it is important that the thread in the bobbin is placed in the right direction. If the bobbin is properly inserted, the thread’s tail end should easily appear and pull up the machine. The thread should not really have difficulty unwinding if the process is right.

With the bobbin in the bobbin case properly fitted into the compartment, the bobbin compartment is then covered for continuation of the threading process.

It is important that a bit of the thread in the bobbin be exposed outside the case or cover of the bobbin. This is because the thread in the bobbin is still lying hidden below the plate where the needle hangs on the outside of the machine. For the thread end inside the compartment to be brought outside the machine, the role of the machine dial comes in.

The machine dial is turned towards the sewer a couple of times for the thread end to prop out. Once the thread end comes to the surface of the machine, it is grabbed and pulled out. The thread may not surface sometimes if the process is not properly adhered to.  If this happens you may have to check the bobbin compartment to confirm that your thread is facing the proper direction.

Click here to check this out and buy on Amazon

Drawing up the Bobbin Thread

To pull out the thread from the bobbin below, the thread needs to be held tightly while the dial of the machine is turned to lift and also lower your needle. The threaded needle will then pick the machine’s bobbin thread up gently. The whole length of the bobbin thread earlier released is now on the surface of machine.  The thread from both the needle and bobbin are now pushed behind the machine stitching area. 

Once these threads are placed under the machine’s presser foot, the sewing can begin. If for any reason the machine is not stitching evenly, then the entire threading process needs to be looked at. The issue will most likely be with the adjustment of the thread tension. It may be necessary to take a second look at the threaded bobbin and the process of its emergence from the bobbin compartment bellow.

If the thread from the bobbin case does not emerge smoothly from below, it will not come up well. If you keep encountering difficulty in the threading process there might be need to consult your machine manual.

Understanding The Importance of Proper Threading As You Learn How To Thread A Sewing Machine

Proper threading of your machine is very important if you are to get the best stitching out of your sewing machine. If there are issues with your threading, it could make your stitching clumsy and uneven. Irrespective of the size or model of your sewing machine, the stitching mechanism remains the same.

It is basically the combination of the upper thread of the sewing machine with the lower thread with the help of a needle. The interaction of the needle, thread and bobbin produces the stitch. The need to make sure your machine is properly threaded cannot therefore be overemphasized.

Click here to check this out and buy on Amazon

Helpful Tips On How To Thread A Sewing Machine Needle

Threading a machine needle should ordinarily be a simple assignment. The size of the needle and its location in the sewing machine can however pose a bit of a challenge. Visibility will expectedly not be high at the location of the needle in the sewing machine.

This is more so considering the tiny size of the needle’s eye or opening. It is therefore important to have the needle area of your sewing machine well-lit to brighten the location.

Most machines have a bulb fixed near the needle region but its illumination can be limited and insufficient for threading the needle. For people who use glasses, it may be necessary to have a stronger pair for the purpose of threading.

You may also buy a magnifying glass that will easily assist you thread the needle. Some machines come with automatic needle threader in which case you need not bother about threading your needle.

Click here to check this out and buy on Amazon

 It also helps if the thread end is properly trimmed with scissors that is sharp. It is easier to thread your needle with a moist thread so look for a way to achieve this before attempting threading.

It is important to routinely oil and clean your sewing machine before you start stitching.

At the commencement of your sewing give the machine a slow start to confirm that your threading is in order. You may then speed up the tempo of your sewing without fear of having issues with your sewing machine.

For learners it is advisable to practice your stitching with sample materials or fabric scraps. Use them to attempt simple straight stitching until you are conversant or at home with your sewing machine.

The need to use thread of good quality for your stitching has to be emphasized here because a poor quality thread can affect the finishing of your fabric. It can also impact on the easy release of your fabric in the stitching process. An uneven stitching of your fabric is evidence that the tension adjustment is not yet okay.

There is need to change the needle of your sewing machine regularly. This is because it is susceptible to getting blunt and bent by the rigors of regular stitching. It is also advisable to turn your sewing machine off while threading both the upper and lower part of the machine to avoid injury by the needle.

Conclusion on How To Thread A Sewing Machine

In this article we may summarize that sewing seems to be all about having your sewing machine’s needle make an upward and downward movement. The fact however is that a lot of factors will determine how well your sewing machine does. Check out this article on how a to use a sewing machine.

Though the task of threading the sewing machine looks easy, it requires focus and full attention. The process when dutifully followed may not take up to five minutes of your sewing time. It can however become frustrating when your threading is not tallying.

It is therefore important to give attention to little details in threading your sewing machine. This attention is required from the threading of the upper thread through that of the lower thread, up to the point of merging both threads.

We have attempted a detailed step by step explanation on how to thread a sewing machine and hope you will find this article useful. You may make further research on the topic regarding areas we may not have addressed to your satisfaction. On the whole our aim is to be of help and we hope we have been! Thanks

Click here to check this out and buy on Amazon